Professional Development – Course Finder

The Level 3 Award in Requirements for Electrical Installation BS7671: 2018 (2382-18) (18th Edition) course provides a comprehensive guide to fulfilling the requirements of BS 7671: (2018) and is taught to the 18th Edition.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

ACCA (Association of Chartered Certified Accountants) is a highly respected professional qualification, which equips students for a successful career in accountancy. It is a postgraduate qualification, which provides access and exemption to students who wish to pursue their studies at Masters level.

This Achievement Measurement 2 (AM2) J.I.B. Qualification endorses the City & Guilds Emta NVQ Level 3 qualification. The JIB sets the standards for employment, welfare, grading and apprentice training in the electrical contracting industry.

The Pre-Assessment Training for Achievement Measurement 2 J.I.B. Qualification AM2 is an insight into your ability to successfully complete the Achievement Measurement 2.

The Appliance Training and Assessment has been created to allow candidates to obtain competence in their chosen appliances. Candidates will obtain ACS qualification which will enable them to register with Gas Safe in order to work on their chosen appliances.

The Electrical Awareness two day course covers both theory and practical training in relation to basic domestic electrical circuits, electrical regulations and electrical principles.

As a BPEC accredited training and assessment centre we are dedicated to offering a quality service to all who work within the Building Services Engineering sector.

As a BPEC accredited training and assessment centre we are dedicated to offering a quality service to all who work within the Building Services Engineering sector.

The Combined Level 3 Certificate in Initial Verification and Certification of Electrical Installations (C&G 239-50) and Periodic Inspection, Testing and Reporting of Electrical Installations (C&G 2391-51) award is ideal for qualified electricians wishing to update their knowledge of electrical installation techniques.

The Combined Level 3 Certificate in Initial Verification and Certification of Electrical Installations (C&G 239-50) and Periodic Inspection, Testing and Reporting of Electrical Installations (C&G 2391-51) award is ideal for qualified electricians wishing to update their knowledge of electrical installation techniques.

The Combined Level 3 Certificate in Initial Verification and Certification of Electrical Installations (C&G 239-50) and Periodic Inspection, Testing and Reporting of Electrical Installations (C&G 2391-51) award is ideal for qualified electricians wishing to update their knowledge of electrical installation techniques.

This course is intended for experienced electricians who are looking to enhance their skills.

This course is ideal for delegates from organisations that have responsibility for maintaining gas safety in their properties such as local authorities, hospitals and landlords.

This Introduction to Networking course is the first in a series of four semesters that make up the full CCNA qualification. Students who successfully complete Semesters 1 to 4 are eligible to take the CCNA certification exam.

This course builds on CCNA1 Introduction to Networking covering theoretical concepts and practical application of switching and routing techniques, gaining hands-on-experience in the design and configuration of a small network using typical switches and routers.

By the end of this course, students will be able to configure and troubleshoot routers and switches and resolve common issues with network protocols, such as OSPF, EIGRP and STP in both IPv4 and IPv6 networks.

Individuals with an interest in a career providing mortgage advice or those wishing to do a refresher course. CeMAP is recognised by employers and clients as a mark of excellence and professionalism.

This course addresses the legal and practical aspects of dealing with the problems of environmental noise pollution, which brings about duties for all industrial companies and local authorities in connection with the measurement, assessment and control of environmental noise.

COCN1 – Core Commercial Natural Gas Safety is a pre-requisite assessment for all other assessments within the commercial sector which covers all aspects of gas safety and legislation. Like domestic, there is also a core gas qualification required to work on commercial installations.

These qualifications enable refrigeration engineers to meet legal requirements in relation to the qualifications required to work with Fluorinated Greenhouse Gasses, otherwise known as F Gasses.

The Commercial Appliances Training focuses on ACS assessment in appliances to include: overhead radiant plaque, tube heaters direct, indirect fired heating appliances and boosters

On completion delegates will be able to make the gas connection to commercial pipework in excess of 28mm diameter, requiring the system to be proved gas tight and purged of air

Core changeover from natural gas to LPG core in Permanent Dwellings, Residential Park Homes and Leisure Accommodation Vehicles.

The CCN1 – Core Domestic Natural Gas Safety is a pre-requisite assessment for all other appliance assessments and covers all aspects of gas safety and legislation

Based on the current national standards and certificated through City & Guilds, this course provides candidates with a framework for demonstrating their competence as customer service providers

Our Domestic Gas Foundation course is designed for ACS Category 2 and 3 candidates wanting to enter the gas industry.

This course is designed for candidates who wish to complete the City & Guilds 2357 NVQ Level 3 with an aim to becoming a JIB registered electrician.

Colchester Institute can offer a selection of First Aid courses for companies looking to train a number of members of staff. These courses will enable delegates to increase their knowledge and skills to carry out their work more effectively.

Colchester Institute can offer a selection of First Aid courses for companies looking to train a number of members of staff. These courses will enable delegates to increase their knowledge and skills to carry out their work more effectively.

Colchester Institute can offer a selection of First Aid courses for companies looking to train a number of members of staff. These courses will enable delegates to increase their knowledge and skills to carry out their work more effectively.

This course will be of particular interest to employers, landlords, facilities managers, or anyone in control of premises and with health and safety responsibilities for others.

Suitable for all those who are responsible for designing, installing and maintaining hot and cold water services

This course will take you through the correct set up and shut down of the Oxy- Acetylene and Oxy-Propane mobile cutting equipment, the flame types produced and how to check your equipment is in good working order.

We also offer modules from the CMI Level 3 and 5 Awards, Certificates and Diplomas as stand-alone qualifications. These modules are delivered online and require 3 x one hour sessions to complete. These are available as both accredited and uncredited qualifications.

To become a nominated tester (NT) for class 3, 4, 5 or 7 vehicles (cars, private buses and light commercial vehicles) you must have an accepted qualification or accreditation at Level 3 or above.

This half day training and assessment programme covers topics such as health & hygiene awareness and contamination risks when working on water sites, water treatment or transient works on the water network.

The NEBDN Certificate in Dental Radiography is aimed at qualified and GDC registered Dental Nurses.

OFTEC have set specific pre-requisite entry requirements for candidates wishing to enter the training and/or assessment process. This ensures that candidates have the necessary required level of experience/knowledge before being permitted entry to the scheme.

An Oral Health Educator can complement the role of the dental hygienist. The NEBDN Certificate is not just about developing professionally from a registered dental nurse to an Oral Health Educator. This qualification is also about growing both professionally and on a personal level; developing self-confidence and self-belief.

The Certificate of Competence for the Inspection and Testing of Electrical Equipment (PAT) 2377-22 is based on the IET’s Code of Practice for In-Service Inspection and Testing of Electrical Equipment in association with City and Guilds

The Portable Appliance Testing (PAT Testing) Practical Course covers the legal requirement for PAT Testing and does not require participants to take a City & Guilds theory examination.

Experienced Worker Practical Assessment (EWPA) – Successful completion of the 2 day assessment results in a Level 2 Site Carpentry or Bench Joinery NVQ Diploma. Candidates will have a minimum of 5 years industry experience. It is essential that you are either employed or self employed and are covered by Public Liability Insurance.

The (TAQA) Internal Quality Assurance Award/Certificate qualification sets the standard for those involved in or Managing the Internal Quality Assurance of the assessment process within an Approved Centre. All Approved Centres should have an Internal Quality Assurer to liaise with the awarding body and act as a Quality Assurance Manager.

The TAQA qualifications set the standard for those involved in assessing qualifications that are regulated (for example by an external awarding body). The Assessor Award delivery is designed to be “candidate friendly” and involves extensive one-to-one support for candidates.

The Work at Height Regulations 2005 apply to all work at height where there is a risk of a fall liable to cause injury. The Regulations place duties on employers, the self-employed and any person who may contract others to work at height.

Learn the health and safety procedures needed to reduce the danger involved in working in confined spaces. This course provides delegates with a complete understanding of the dangers involved with confined spaces.